📞 Call for Free Quote — (407) 922-9857
Pool Deck CleaningDr. Phillips, FL
Algae and mildew turn a wet pool deck into a slip hazard right where bare feet land, and they leave the whole pool area looking neglected. We pre-treat the growth, then clean concrete at the higher pressure a durable slab can take and pavers at controlled pressure with attention to the joints and joint sand, inside or outside the screen cage. The algae is lifted off the walking surface, and the deck dries to a bright, even finish. Serving Bay Hill, the Sand Lakes, and all of Dr. Phillips.
Why Clean Your Pool Deck in Dr. Phillips
Lifts the Slick Algae
Algae is what turns a wet deck slick. We remove it from the surface people cross barefoot.
Treats, Not Just Rinses
A cleaning solution kills the algae and mildew rather than pushing the surface film around, which helps the result hold longer than a water-only wash.
Right Pressure per Surface
Concrete takes rotary pressure; pavers take controlled pressure with attention to the joints; coatings get a cleaning solution, dwell time and a low-pressure rinse.
Bright, Even Finish
What dries is an even, light surface in place of the patchy staining it had.
Get a Free Quote
Response within 1–3 business hours — no pressure, no obligation.
✓ No spam. We only use your info to reach you about your quote.
Why Dr. Phillips Homeowners & Property Managers Trust Us With Their Pool Deck
A dirty pool deck is a traction problem as much as a visual one. The black and green film that builds up on a pool deck here is algae, and algae holds water and turns slick the instant the surface gets wet. The deck is the one stretch of the property people cross barefoot and in a hurry, right at the edge of the water. For a family that uses the pool, that's a safety concern. Lifting that growth off the surface is the point of the work.
Pressure alone lifts the surface film and leaves the growth down in the pores, which is why a water-only cleaning comes back green. So we pre-treat first: a surface-appropriate cleaning solution goes across the whole slab to kill the algae, mold and mildew and loosen the buildup before the main cleaning. Its strength and dwell time depend on the material and how heavy the growth is, and shaded, slow-drying areas get extra attention. Then we clean at the pressure that suits the surface and detail the borders, coping, steps and corners the main pass misses. When it's appropriate for the surface and its condition, we finish with a post-treatment that addresses remaining growth. Treating the growth, rather than only rinsing it off, helps the finish last.
Then there's the look. Whether the deck is in Bay Hill, Phillips Landing or elsewhere in Dr. Phillips, a slick, algae-blackened surface stands out, and a clean one makes the whole pool area present better. Once the algae is lifted, we go after the staining that reads as neglected: leaf tannins under the screen cage and the chalky calcium that water pressure alone won't touch. If you want rust marks from patio furniture treated, that's a separately priced restoration add-on we'll quote before the visit. The result we're after is a deck that looks clean and even, with the slick film off the surface people walk on.
We're a local crew based in Kissimmee, owner-operated rather than a franchise. We serve Dr. Phillips, and we know what a Central Florida pool deck faces: humidity, storms, pollen and sunscreen ground in around the waterline. The surface dictates the method, not the other way round.
What Makes Us Different:
- Algae and mildew taken out of the surface so the dried deck looks bright and even
- Surface sets the method — higher pressure where durable concrete suits it, controlled on pavers with attention to the joints, treatment with dwell then a low-pressure rinse on coatings
- Inside the screen cage, we clean the deck up to the frame and detail its edges along the screen track
- Mineral and organic stains — some may require additional spot treatment depending on the surface and severity; oil and rust removal is a separate restoration service, priced on its own, with no guarantee of complete removal
- Before-and-after photos — built for HOA boards and property managers
Having the enclosure cleaned as well? See our pool cage cleaning in Dr. Phillips — we soft wash the screens and frame the same visit. Want the pavers protected afterward? We also handle paver sealing in Dr. Phillips, so one crew cleans, then comes back to seal. Prefer to see the full range of what we clean? Start with our Dr. Phillips pressure washing hub or browse our soft washing services.
Have Pavers? Ask About Sanding & Sealing
Sealing is a separate service, not part of a standard pool deck cleaning. If you have a paver pool deck, we can come back once the surface is fully dry — typically the following day or as weather conditions allow — to re-sand the joints as needed and apply a professional paver sealer. That helps stabilize the joint sand, protect the surface, preserve its appearance depending on the sealer selected, and make future maintenance easier. One crew, from cleaning through sealing.
Every pool deck cleaning is backed by our satisfaction guarantee. We’ll review the completed work with you, and if something within the agreed scope was missed or isn’t up to our standard, we’ll come back and make it right.
Property Assessment & Firm Quote
In most cases, we can price your pool deck remotely without scheduling an onsite estimate. We’ll ask a few questions about the surface, size, condition, and areas you want cleaned, then provide a firm quote — usually within 1–3 business hours.
If we can’t accurately assess the property remotely, we’ll arrange an onsite visit. Once your quote is approved, your price won’t change unless the scope of work changes.
Choose Your Service Date
Choose a service date that works best for you. We’ll confirm your appointment in advance and send you a text when our crew is on the way.
Same-week appointments may be available depending on our schedule.
Property & Landscaping Protection
Before applying any cleaning solution, we thoroughly pre-wet nearby plants, shrubs, grass, and surrounding areas. We rinse the landscaping again afterward to reduce its exposure to overspray and runoff.
We can move a small amount of lightweight furniture when needed. If the deck has a larger furniture setup or heavy items, we can clean around them, or if they need to be moved and reset, an additional moving fee may apply. We'll confirm that with you before the work begins. Delicate items and surrounding surfaces are protected or avoided as needed.
Pre-Treatment Application
We apply a surface-appropriate cleaning solution across the pool deck to treat algae, mold, mildew, and other organic buildup — rather than relying on water pressure alone.
The strength of the treatment and dwell time are adjusted based on the surface material and its condition, with additional attention given to shaded and slower-drying areas where organic growth tends to be heavier.
This helps loosen the buildup before cleaning and helps the surface stay cleaner longer than a basic water-only cleaning.
Surface-Appropriate Cleaning
Every pool deck is cleaned according to the material — not with the same pressure across every surface.
On durable concrete, we can use a commercial rotary surface cleaner to produce an even, consistent finish. Pavers are cleaned using controlled pressure to minimize unnecessary disturbance of the joint sand.
For travertine, painted pool decks, coatings, or other more delicate surfaces, we rely more heavily on the proper cleaning solution, dwell time, and low-pressure rinsing instead of forcing high pressure onto the surface.
The goal is simple: use the cleaning method the surface actually calls for.
Edge Detailing & Final Rinse
Once the main surface has been cleaned, we detail the areas larger equipment can’t properly reach — including borders, coping, steps, corners, and edges around the pool and screen-track areas where applicable.
The entire deck is then thoroughly rinsed, along with surrounding areas and landscaping.
Post-Treatment for Longer-Lasting Results
When appropriate for the surface and its condition, we apply a final treatment to address remaining organic staining and help slow the return of algae and mildew.
This finishing step helps give the deck a cleaner, more even appearance and helps it stay cleaner longer between professional cleanings.
Pressure Washing vs. Soft Washing
For the slab, which is hard surface, pressure is the correct tool. The surrounding materials, screen cage overhead included, are far more delicate. Here's how the two methods split the work on a Dr. Phillips pool area.
Pressure Washing
For even, controlled coverage on ground-in algae and surface buildup, a commercial rotary surface cleaner set to the surface does the work.
- Broom-finish and smooth concrete decks
- Concrete and brick paver decks
- Pool deck coping, steps and walkways
What We Soft Wash Instead
The slab can take it; the surrounding materials cannot. On these we switch to a low-pressure soft wash instead, which avoids the damage high pressure causes:
- The pool cage / screen enclosure — high pressure tears mesh out of the frame
- Kool Deck and other cool-deck coatings that strip under a wand
- Travertine and natural stone — treated, then rinsed at low pressure
- Screened lanai ceilings, roof edges and gutters above the deck
- Wood and vinyl fencing bordering the pool area
- House siding and stucco backing onto the deck
Pool Deck Surfaces We Clean in Dr. Phillips
The surface, not a fixed pressure, determines how a pool deck should be cleaned. What follows is the treatment each material calls for.
Broom-Finish & Smooth Concrete — High Pressure
Durable and forgiving. Higher pressure through a commercial rotary surface cleaner cleans the slab evenly.
Concrete & Brick Pavers — Controlled Pressure
Paver cleaning is handled at controlled pressure, with extra care around the joints and the joint sand — and can be re-sanded and sealed afterward.
Travertine — Treated, Then Low-Pressure Rinse
The method here is treatment first: a cleaning solution left to dwell on the stone, then a controlled low-pressure rinse matched to the travertine and its condition. High pressure would etch it.
Kool Deck / Cool-Deck Coatings — Low Pressure
Textured cool-deck coatings strip under too much pressure. The approach is a cleaning solution with dwell time, followed by a controlled low-pressure rinse matched to the coating and its condition.
Stamped / Decorative Concrete — Low Pressure
Painted and coated decorative finishes are treated with a cleaning solution, given dwell time, then rinsed at controlled low pressure for the finish and its condition.
Screened Lanai Decks — Inside the Cage
We clean decks inside a screen enclosure as well as open pool decks. Inside the cage, we clean the deck right up to the frame and rinse down the nearby areas the cleaning affected before we wrap up. The screens and frame themselves are a separate service.
The Case for Cleaning a Pool Deck Sooner
Delaying a cleaning isn't a purely cosmetic call. On a pool deck here it's a safety risk, a staining problem, and an appearance problem, and all three get worse the longer you wait.
Algae goes slick the moment the deck is wet, and a barefoot slip at the pool edge can mean a serious injury.
A black-streaked deck reads as dirty from across the lanai and against the neighbors. Around a pool that gets daily use, it is easier to stay ahead of the growth than to catch up on it.
Rust, calcium and deep algae do not remain surface-level forever. Over time they set into the material. Some mineral and organic stains may require additional spot treatment depending on the surface and severity. Oil and rust stain removal is a separate restoration service, evaluated and priced on its own, with no guarantee of complete removal — results depend on the stain, the surface and how far it has set in.
Results That Speak For Themselves
What Dr. Phillips Homeowners Say About Our Pressure Washing
"Professional, fast, and reliable. Worked with my budget and delivered excellent results. Great communication, attention to detail, and overall an awesome experience."
"Very professional and reasonably priced! Will definitely recommend!"
"They are professional, prompt and absolutely no surprises. Did what they promised and we are so happy with the results. We definitely recommend to all our friends and neighbors."
Areas We Clean Pool Decks In & Around Dr. Phillips
Bay Hill, Phillips Landing and the surrounding neighborhoods — same surface-matched method, from 32819 out to 32836.
32819
32819
32819
32836
32836
32819
32819
32819
Pool Deck Cleaning Dr. Phillips FAQ
What homeowners and property managers here ask us before we clean their deck.
How much does pool deck cleaning cost in Dr. Phillips?
Do you clean pool decks in Bay Hill and the surrounding communities?
Is my pool deck slippery because of algae, and will cleaning fix it?
Will pressure washing damage my pavers or travertine deck?
How often should I clean a pool deck in Dr. Phillips?
Do you also seal paver pool decks after cleaning?
Why Pool Decks Get Slick in Dr. Phillips
A dingy-looking deck is a fair reason to clean, but the better reason is what's growing on it. Shade and trapped moisture let algae and mildew settle into a deck that rarely dries out, and that wet growth is slick in the one place everyone walks barefoot. That's why we build the job around algae removal instead of treating it as an extra.
We clean pool decks across Dr. Phillips, from the Bay Hill fairways to Phillips Landing and Vizcaya. A slick, black-streaked deck is a traction problem, and keeping it clean is part of maintaining the look of the property. We also serve Sand Lake Hills, Orange Tree and the Sand Lakes.
Excessive or poorly matched pressure can damage sensitive surfaces. Durable broom-finish concrete can take a rotary surface cleaner at real pressure, but that same pressure will etch, strip or blotch travertine, Kool Deck, other cool-deck coatings and stamped or painted concrete. So we identify the surface first, and those materials get a dwell-time treatment with a controlled low-pressure rinse instead. We also work carefully around your landscaping and along the screen enclosure track. Around the pool, we keep overspray and loosened debris out of the water as much as we can, though a little can still reach it. If it's convenient, schedule your regular pool service for later that day or the next day, so the pool gets its normal service right after our work instead of right before it. Some mineral and organic stains may require additional spot treatment depending on the surface and severity, because pressure alone was never a stain remover; oil and rust removal is a separate restoration service, priced on its own, with no guarantee of complete removal.
We clean pool decks across every corner of Dr. Phillips — from Bay Hill to the surrounding neighborhoods. If you want the screen enclosure cleaned in the same visit, we soft wash it too; see our pool cage cleaning page, and for everything we cover across the region, see our full Central Florida service area.
AB Superior Wash371 Bald Cypress Dr, Kissimmee, FL 34744
Phone: (407) 922-9857
Hours: Monday–Sunday, 7:30 AM – 8:00 PM
Written by Alejandro Garcia — Owner, AB Superior Wash · (407) 922-9857 · Open every day, 7:30 AM–8:00 PM
Last updated: July 2026
Time For a Cleaner, Brighter Deck?
Slippery algae gone, staining treated, an even deck underfoot on concrete or pavers. Perfect for a family lanai or a larger open pool deck.
