📞 Call for Free Quote — (407) 922-9857
Paver SealingClermont, FL
A paver seal is a full restoration, not a quick spray. We deep-clean and strip your pavers, re-sand every joint with fresh silica, then seal to help lock in the color, resist Florida UV fading, and stabilize the joints and reduce weeds, ants, and washout. Driveways, pool decks, and patios from Kings Ridge and Summit Greens to downtown Clermont.
Why Seal Pavers in Clermont
Helps Lock In the Color
The Florida sun and the humidity coming off the Chain of Lakes bleach unsealed pavers gray and chalky. A quality sealer shields the pigment and helps hold that just-installed color longer.
Keeps the Pavers Looking Their Best
In a gated golf community with a covenant appearance standard, a sealed driveway and pool deck look sharp and hold their joint sand better, so fewer weeds come up and less loose grit gets tracked into the house.
Fewer Weeds & Ant Hills
Fresh sand locked under sealer hardens the joints, which helps reduce weeds, ant hills and summer-storm washout between your pavers.
Protects Your Investment
Left unsealed, pavers wash out, shift, and sink until they need full re-leveling. We generally recommend evaluating pavers for resealing every 2 to 3 years; the right interval depends on traffic, sun and weather exposure, drainage, sealer condition and overall wear. Resealing costs a fraction of tearing out and re-laying the whole surface.
Get a Free Quote
Response within 1–3 business hours — no pressure, no obligation.
✓ No spam. We only use your info to reach you about your quote.
Why Clermont Homeowners Trust Us With Their Pavers
A paver seal isn't a spray-and-go. Seal over dirty, damp, or washed-out pavers and you trap in the very stains, haze, and weeds the sealer is supposed to lock out. We do it in the right order every time: deep clean the surface and strip failing sealer where it's needed, re-sand the joints, let everything dry, then seal.
Sealing over a surface that was only rinsed locks the problem in. We start with a pre-treatment that lifts the built-up grime and kills the organic growth in the pavers and down in the joints, instead of leaving that to water pressure. Then we pressure wash the surface, which takes the weeds and loose debris with it. The pavers have to dry fully before anything goes on top — typically the following day or as weather conditions allow — and only then do we re-sand the joints and apply the sealer. Cleaning, sand and seal are one job done in the right order, not a coat of sealer over a quick rinse.
We're an owner-operated local crew based in Kissimmee, and we regularly serve the Clermont hills, from the older homes near downtown to the gated golf communities off US-27. We seal for what the sun and humidity out here actually do to pavers. Licensed and fully insured in Florida, 150+ five-star Google reviews, and a satisfaction guarantee.
What Makes Us Different:
- We re-sand every joint before sealing — sealing over depleted joints skips an important restoration step
- We neutralize efflorescence first wherever it's present, which helps keep its white haze from being sealed into the finished surface
- We match the sealer to your surface — concrete, brick, and travertine each need a different product
- We help you pick matte or wet-look before we ever open a bucket
- We coordinate gate access with the guardhouse and can work directly with property managers in gated golf and HOA communities
Need the concrete cleaned but not sealed? See the full pressure and soft wash range on our exterior cleaning services. For pool decks specifically we also do pool deck cleaning and driveway & concrete cleaning, and you can see every city we cover on our service areas page.
Property Assessment & Firm Quote
In most cases, we can price your pavers remotely without scheduling an onsite estimate. We’ll pull the real measurements and ask about the paver type, the condition of the joint sand, and any efflorescence or staining, then provide a firm quote for cleaning, sand and sealer — usually within 1–3 business hours.
If we can’t accurately assess the property remotely, we’ll arrange an onsite visit. Once your quote is approved, your price won’t change unless the scope of work changes.
Pre-Treatment Application
Weeds and organic growth get a targeted pre-treatment so they lift in the wash instead of staining under the new sealer. Oil and rust staining is treated separately as a restoration add-on when it is identified and quoted ahead of the job. Old failing sealer is stripped, and efflorescence is neutralized before anything else.
Surface Cleaner Pressure Wash
A commercial rotary surface cleaner strips the pavers evenly — no zebra striping — and pulls the old, washed-out joint sand out of the gaps. On travertine and softer stone we drop the pressure and take extra care.
Edge Detailing & Rinse
Borders, steps, and the seams against the house and pool coping get hand-detailed, then the whole surface is rinsed clean and left to dry completely. Trapped moisture is a common cause of a hazy, milky seal.
Re-Sand the Joints
We restore the joints with fresh silica joint sand, sweeping it into every gap and packing it to depth. Full, stabilized joints help keep the pavers from shifting and make weeds and ant hills far harder to take hold.
Apply the Sealer & Cure
The step that changes everything. Once the surface is clean, re-sanded, and bone-dry, we apply your chosen finish — matte or wet-look — in even coats with a breathable sealer matched to your pavers. Cured, it helps preserve the color, reduce UV fading and stabilize the joint sand, and beads off water. We give you exact walk-on and drive-on times before we leave.
Every paver job we do is backed by a satisfaction guarantee. If something within the agreed scope was missed or isn't up to our standard, we'll come back and make it right.
Wet Look vs. Matte (Natural) Finish
With your Clermont pavers cleaned and re-sanded, all that's left is choosing the finish. Both finishes are designed to protect the surface, so the right choice comes down to the look you prefer and your community's standards.
Matte (Natural) Finish
A natural, low-sheen finish that protects your pavers without making them look glossy. It gently deepens the color of concrete and stone while keeping the understated look that suits Clermont's hillside and golf-community homes.
- Keeps the natural look of the pavers, with no shiny coating
- A soft color lift with no glare
- A clean, enduring finish that suits the home
- A restrained look that is generally easier to match with HOA guidelines
- Complete sealing protection at a friendlier price
Wet Look (Glossy) Finish
A wet-look sealer deepens the natural color of your pavers and adds a smooth, glossy finish. It gives faded concrete and stone a richer, freshly restored appearance that stands out on a driveway or lakeview patio.
- A richer, more saturated paver color
- A soft, wet-look sheen that stays tasteful
- A crisp, freshly restored appearance
- Adds noticeable curb appeal to driveways and patios
- A finish that lifts the look of the whole property
Both finishes are designed to protect the surface. Matte and wet-look sealers help repel water, oil, and spills, lock the joint sand in place, slow weed and algae growth, and extend the life of the surface. It comes down to the appearance you prefer and your budget.
Pavers & Surfaces We Clean and Seal in Clermont
Every common paver and stone surface across the area — matching the right pressure and the right sealer to each material.
Concrete Pavers
The most common paver on local driveways and lanais. Takes a matte or wet-look sealer beautifully once the efflorescence is cleared.
Travertine Pool Decks
Soft, cool-underfoot natural stone all over the golf-community pool decks in Kings Ridge and Heritage Hills. Cleaned at low pressure and sealed with a penetrating sealer — never a glossy film.
Brick & Clay Pavers
Classic brick and clay, common on the older homes near downtown Clermont. We strip the old joint sand, re-sand, and seal to help hold the color and stabilize the joint sand.
Paver Driveways
Heavy traffic and oil drips — and the builder-laid driveways in Highland Ranch, Waterbrooke, and Sawgrass Bay that were never sealed. Sealing helps keep stains out and the joint sand in place.
Golf-Community Pool Decks
Pool decks and lanais in Kings Ridge, Summit Greens, and Legends, communities with their own appearance standards. Sealing helps the deck resist UV fade and hold an even, well-kept look.
Patios & Walkways
Where stains and weeds in the joints show most. Re-sanded and sealed, a patio holds up better against leaf tannins and grill grease and stays more even underfoot.
Results That Speak For Themselves
What Clermont Homeowners Say About Our Paver Work
"Very professional and reasonably priced! Will definitely recommend!"
"Outstanding service. We are blown away by the professionalism, level of service, attention to detail, and the price was affordable! We will absolutely hire again and let everyone know they have to go with AB Superior Wash paver cleaning — you won't regret it!"
"Exceptional Work! These guys are really professionals — love the service."
Areas We Seal Pavers In & Around Clermont
Brick on the older downtown homes, new concrete pavers off Hartwood Marsh Road, travertine decks in the golf communities — different surfaces, same clean-re-sand-seal job.
34711
34711
34711
34711
34711
34711
34714
34711
Paver Sealing Clermont FAQ
What homeowners and property managers ask us before we seal.
How much does paver sealing cost in Clermont?
How long does paver sealer last in Clermont's humidity?
Do you re-sand the joints before sealing my pavers?
Can you seal pavers in a gated golf community on a schedule?
Do the golf-community HOA appearance rules affect how you seal pavers?
Why do my pavers have a chalky white haze?
Why Pavers Fade and Wash Out in Clermont
Sealing is only the last of three stages, and it's only as good as the prep under it. First we clean the pavers at a pressure matched to the material and its condition and pull out the old joint sand, along with any failing sealer, efflorescence and weeds. Oil or rust stain removal is a separately priced restoration add-on that we identify and quote before the job. Then we re-sand the joints. Only once the surface is clean, re-sanded, and fully dry do we seal. Sealing over washed-out joints leaves the pavers loose, and sealing over a damp surface can lock a milky haze under a film that isn't easy to undo. That order matters.
Clermont is hard on pavers in two specific ways. The sun and the moisture off the Chain of Lakes fade unsealed color fast. Driveways go gray and chalky long before their time. Our summer downpours also flush the sand out of open joints, which is why pavers start to shift and weeds and ant hills move in. Re-sanding with fresh silica and locking it under sealer helps stop both. We pack that sand to the full depth of each joint instead of just topping it off. The Concrete Masonry & Hardscapes Association, the industry body that absorbed the old Interlocking Concrete Pavement Institute, notes that pavers should be cleaned of dirt, stains and efflorescence and allowed to dry before they're sealed.
Where this really bites is the gated golf-community belt. The pool homes in Kings Ridge, Summit Greens, and Legends are held to a covenant appearance standard, so a faded, weedy driveway or a grimy travertine pool deck draws a board letter — and property managers want them kept consistent. Across the newer subdivisions, builders off Hartwood Marsh Road lay beautiful paver driveways and rarely seal them, so within a year or two the color's fading and the joints are emptying out; sealing a fairly new surface is the best time to do it, before the stains set in. You choose the finish: a matte or natural look keeps the pavers understated for a resort streetscape, while a wet-look sealer deepens the color and adds shine. Concrete and brick can take either; travertine and natural stone get a penetrating sealer that soaks in and breathes rather than a glossy film. We walk you through the options before we open a bucket. How long the sealer takes to cure depends on the product and on our heat and humidity, so we'll give you the cure-time instructions for the specific sealer used on your project. When you're ready for the rest of the exterior, pair it with our pool deck cleaning and soft washing — or see the full Central Florida service area.
AB Superior Wash371 Bald Cypress Dr, Kissimmee, FL 34744
Phone: (407) 922-9857
Hours: Monday–Sunday, 7:30 AM – 8:00 PM
Written by Alejandro Garcia — Owner, AB Superior Wash · (407) 922-9857 · Open every day, 7:30 AM–8:00 PM
Last updated: July 2026
Ready For Sealed, Like-New Pavers?
Deep-cleaned, re-sanded, and sealed against the Florida sun — downtown to the gated golf communities.
