📞 Call for Free Quote — (407) 922-9857
Pool Deck CleaningWinter Park, FL
A shaded pool deck stays damp and grows algae that turns slick and black right where bare feet land — a real slip hazard at the edge of the water. We clean durable concrete at higher pressure where the slab suits it and pavers at controlled pressure with attention to the joints and joint sand, right up to the coping and inside the screen enclosure, leaving a bright, even, less slippery finish.
Why Clean Your Pool Deck Here
Lifts the Slick Algae
On a shaded deck the slick is wet algae. Removing it from the surface leaves the deck less slippery.
Restores the Bright Finish
A black-streaked deck drags down the whole pool area. A bright, even surface doesn't.
Right Pressure per Surface
Rotary pressure on durable concrete, controlled pressure on pavers with attention to the joints, and a dwell-time treatment with a low-pressure rinse on coatings.
Treats the Growth, Not the Film
Pre-treatment kills the algae and mildew themselves rather than rinsing the top layer, which is what makes the result last longer than a water-only wash.
Get a Free Quote
Response within 1–3 business hours — no pressure, no obligation.
✓ No spam. We only use your info to reach you about your quote.
Why Winter Park Homeowners Trust Us With Their Pool Deck
The trouble with a dirty pool deck is footing, not just appearance. The black and green film that builds up on a deck here is algae, and algae holds water and turns slick the instant the surface gets wet. That strip at the water's edge is where bare feet land, usually in a hurry. Shade and humidity keep a deck damp, and algae takes hold on a damp surface. The point is getting that growth out of the surface, and footing comes first.
Water alone lifts the surface film and leaves the growth down in the pores, so a water-only cleaning greens up again. The pre-treatment comes first. A surface-appropriate cleaning solution covers the whole slab, killing the algae, mold and mildew themselves, with strength and dwell time set by the material and how heavy the growth is, and extra attention where shade keeps the deck slow to dry. Cleaning follows only once that has worked, matched to the surface, because treating the growth rather than rinsing it off is what makes the finish last.
Then there's the look. A slick, algae-blackened deck drags the whole property down. Once the algae is gone we go after the staining that reads as neglected: oak-tannin marks and leaf debris caught under the screen cage, rust from patio furniture, and the chalky calcium that water pressure alone won't touch. You notice the bright finish. The reason to clean is underfoot.
We're the local crew — owner-operated, not a franchise driving in from another county. We know what a pool deck deals with: shade and moisture, leaf debris, and sunscreen ground in around the waterline. We pick the method the surface can take.
What Makes Us Different:
- Growth removed from the surface so the deck dries less slippery
- Method per surface — higher pressure where durable concrete allows, controlled on pavers with attention to the joints, treatment with dwell and a controlled low-pressure rinse on coatings
- We work inside the cage and manage runoff around the screen track and the pool
- Rust, mineral and organic stains — some may require added spot treatment, depending on the surface and severity
- Runoff managed around the pool, the landscaping and nearby drainage areas
Cleaning the deck and the enclosure together? See our pool cage cleaning in Winter Park — we soft wash the screens and frame the same visit. Want the pavers protected afterward? We also handle paver sealing in Winter Park, so one crew cleans, then comes back to seal. Need the driveway done too, or the full range of hard surfaces? See driveway cleaning or our pressure washing services.
Have Pavers? Ask About Sanding & Sealing
Sealing is a separate service, not part of a standard pool deck cleaning. If you have a paver pool deck, we can come back once the surface is fully dry — typically the following day or as weather conditions allow — to re-sand the joints as needed and apply a professional paver sealer. That helps stabilize the joint sand, protect the surface, preserve its appearance depending on the sealer selected, and make future maintenance easier. One crew, from cleaning through sealing.
Every pool deck cleaning is backed by our 100% satisfaction guarantee. We’ll review the completed work with you, and if something we cleaned was missed or isn’t up to our standard, we’ll make it right.
Property Assessment & Firm Quote
In most cases, we can price your pool deck remotely without scheduling an onsite estimate. We’ll ask a few questions about the surface, size, condition, and areas you want cleaned, then provide a firm quote — usually within 1–3 business hours.
If we can’t accurately assess the property remotely, we’ll arrange an onsite visit. Once your quote is approved, your price won’t change unless the scope of work changes.
Choose Your Service Date
Choose a service date that works best for you. We’ll confirm your appointment in advance and send you a text when our crew is on the way.
Same-week appointments may be available depending on our schedule.
Property & Landscaping Protection
Before applying any cleaning solution, we thoroughly pre-wet nearby plants, shrubs, grass, and surrounding areas. Throughout the service, we continue rinsing and monitoring landscaping that may be exposed to overspray or runoff.
We can move a small amount of lightweight furniture when needed. If the deck has a large amount of furniture or heavy items, we can clean around them or add a small fee for furniture moving. Delicate items and surrounding surfaces are protected or avoided as needed.
Pre-Treatment Application
We apply a surface-appropriate cleaning solution across the pool deck to treat algae, mold, mildew, and other organic buildup — rather than relying on water pressure alone.
The strength of the treatment and dwell time are adjusted based on the surface material and its condition, with additional attention given to shaded and slower-drying areas where organic growth tends to be heavier.
This helps loosen the buildup before cleaning and helps the surface stay cleaner longer than a basic water-only cleaning.
Surface-Appropriate Cleaning
Every pool deck is cleaned according to the material — not with the same pressure across every surface.
On durable concrete, we can use a commercial rotary surface cleaner to produce an even, consistent finish. Pavers are cleaned using controlled pressure to minimize unnecessary disturbance of the joint sand.
For travertine, painted pool decks, coatings, or other more delicate surfaces, we rely more heavily on the proper cleaning solution, dwell time, and low-pressure rinsing instead of forcing high pressure onto the surface.
The goal is simple: use the cleaning method the surface actually calls for.
Edge Detailing & Final Rinse
Once the main surface has been cleaned, we detail the areas larger equipment can’t properly reach — including borders, coping, steps, corners, and edges around the pool and screen-track areas where applicable.
The entire deck is then thoroughly rinsed, along with surrounding areas and landscaping.
Post-Treatment for Longer-Lasting Results
When appropriate for the surface and its condition, we apply a final treatment to address remaining organic staining and help slow the return of algae and mildew.
This finishing step helps give the deck a cleaner, more even appearance and helps it stay cleaner longer between professional cleanings.
Pressure Washing vs. Soft Washing
Pressure is the correct tool on the slab, which is hard surface. Around and above it, including the screen enclosure, the materials are delicate. Here's how the two methods split the work on a pool area here.
Pressure Washing
An industry-grade rotary surface cleaner and the right pressure per surface — used for even, controlled coverage when lifting ground-in algae and surface buildup out of a pool deck.
- Broom-finish and smooth concrete decks
- Concrete and brick paver decks
- Pool deck coping, steps and walkways
What We Soft Wash Instead
The slab can take pressure. What surrounds it cannot. On these we switch to a low-pressure soft wash instead, which avoids the damage high pressure causes:
- The pool cage / screen enclosure — high pressure tears mesh out of the frame
- Kool Deck and other cool-deck coatings that strip under a wand
- Travertine and natural stone — treated, then rinsed at low pressure
- Screened lanai ceilings, roof edges and gutters above the deck
- Wood and vinyl fencing bordering the pool area
- House siding and stucco backing onto the deck
Pool Deck Surfaces We Clean Here
The surface decides the method. There is no single right pressure. The approach for each surface follows.
Broom-Finish & Smooth Concrete — High Pressure
Durable and forgiving. An industry-grade rotary surface cleaner at higher pressure helps clean the slab evenly.
Concrete & Brick Pavers — Controlled Pressure
Cleaned at controlled pressure, working carefully around the joints and the sand in them — re-sanding and sealing available afterward.
Travertine — Treated, Then Low-Pressure Rinse
High pressure etches natural stone, so travertine gets treatment instead: a cleaning solution, dwell time, then a controlled low-pressure rinse for the stone and its condition.
Kool Deck / Cool-Deck Coatings — Low Pressure
Textured cool-deck coatings strip if hit too hard. They are treated with a cleaning solution, allowed dwell time, then rinsed at controlled low pressure for the coating and its condition.
Stamped / Decorative Concrete — Low Pressure
Painted and coated decorative finishes are treated with a cleaning solution, given dwell time, then rinsed at controlled low pressure for the finish and its condition.
Screened Lanai Decks — Inside the Cage
Both screened and open pool decks are cleaned. Inside the cage we manage runoff at the track and clean right to the frame.
Why It Pays to Clean a Pool Deck Sooner
Delaying a cleaning is about more than appearance. On a pool deck it's a safety risk, a staining problem, and a curb-appeal problem, and all three get worse the longer you wait.
A barefoot slip at the pool edge can mean a serious injury, and on a shaded deck the wet film that causes it settles back in.
A black-streaked deck reads as dirty from across the yard and drags the whole property down.
Rust, calcium, oak tannins and deep algae don't just sit on top forever. Left long enough in the humidity here, they set into the surface. Some rust, mineral and organic stains may require additional spot treatment depending on the surface and severity.
Results That Speak For Themselves
What Winter Park Homeowners Say About Our Pressure Washing
"Professional, fast, and reliable. Worked with my budget and delivered excellent results. Great communication, attention to detail, and overall an awesome experience."
"Exceptional Work! These guys are really professionals — love the service."
"I can't say enough about Alejandro's professionalism. He answered all my questions, and I had a lot of them. He scheduled the cleaning when it was convenient for me, showed up on time, and completed the driveway cleaning within a reasonable time. I highly recommend this company!"
Areas We Clean Pool Decks In & Around Winter Park
Screened lanai decks and open pool surrounds, concrete, pavers and travertine alike — same surface-matched method, from the 32789 core out to the eastern 32792 line.
32789
32789
32789
32789
32789
32789
32792
32792
Pool Deck Cleaning Winter Park FAQ
What homeowners around the area ask us before we clean their deck.
How much does pool deck cleaning cost in Winter Park?
Will pressure washing damage my pavers, cool deck, or concrete?
How often should I clean a pool deck in Winter Park?
Do you clean pool decks inside the screen enclosure?
Can you seal pavers after cleaning the pool deck?
How do you protect my pool water and landscaping during cleaning?
Why Pool Decks Get Slick in Winter Park
The look of the deck is one reason to clean it. The reason that matters more is traction. Shade keeps a deck damp, algae and mildew settle into it, and wet growth is slick in the one place everyone is barefoot. Taking it out is what leaves the surface less slippery, which is why algae removal leads the job.
We clean pool decks around Lake Osceola, Lake Virginia, Lake Maitland and Lake Mizell, including those inside screen enclosures, where algae and leaf tannins collect under the cage. We also serve Park Avenue, Aloma and Goldenrod. Controlling runoff matters on any pool deck: we manage where cleaning solution flows during the job.
Excessive or poorly matched pressure can damage sensitive surfaces. Durable broom-finish concrete can take a rotary surface cleaner at real pressure. Travertine, Kool Deck and other cool-deck coatings, and stamped or painted concrete will etch, strip or blotch under that same wand, so we identify the surface first and move those to a cleaning solution with dwell time and a controlled low-pressure rinse. We also manage runoff around the pool water, the landscaping and the screen enclosure track. Some rust, mineral and organic stains may require additional spot treatment depending on the surface and severity, because pressure alone was never a stain remover.
We clean pool decks across every corner of this town. If you want the screen enclosure cleaned in the same visit, we soft wash it too; see our pool cage cleaning page, and for everything we cover across the region, see our full Central Florida service area.
AB Superior Wash371 Bald Cypress Dr, Kissimmee, FL 34744
Phone: (407) 922-9857
Hours: Monday–Sunday, 7:30 AM – 8:00 PM
Written by Alejandro Garcia — Owner, AB Superior Wash · (407) 922-9857 · Open every day, 7:30 AM–8:00 PM
Last updated: July 2026
Ready to Clear the Deck?
Slippery algae cleared and staining treated, the deck bright underfoot right up to the coping and the screen track.
