📞 Call for Free Quote — (407) 922-9857
Paver SealingTaft, FL
A paver seal is a full restoration, not a quick spray. We thoroughly clean your pavers, remove failing or incompatible sealer where necessary, re-sand the joints, and apply a fresh coat of sealer once the surface is properly prepared. The seal helps lock in the color, resist Florida UV fading, and stabilize the joints and reduce weeds, ants, and washout. Driveways, pool decks, and patios from the Meadow Woods and Wyndham Lakes subdivisions to the older drives of historic Taft.
Why Seal Pavers in Taft
Helps Hold the Color
The Florida sun and the year-round humidity bleach unsealed pavers gray and chalky. A quality sealer shields the pigment and helps hold that just-installed color longer.
Keeps the Pavers Looking Sharp
In an HOA subdivision, sealing helps the motor court and pool deck look crisp and uniform. With the joint sand held in place, fewer weeds come up and less loose grit gets tracked into the house.
Fewer Weeds & Ant Hills
Fresh sand locked under sealer hardens the joints, which helps reduce weeds, ant hills and summer-storm washout between your pavers.
Protects Your Investment
Left unsealed, pavers wash out, shift, and sink until they need full re-leveling. We generally recommend evaluating pavers for resealing every 2 to 3 years; the right interval depends on traffic, sun and weather exposure, drainage, sealer condition and overall wear. Resealing costs a fraction of tearing out and re-laying the whole surface.
Get a Free Quote
Response within 1–3 business hours — no pressure, no obligation.
✓ No spam. We only use your info to reach you about your quote.
Why Taft Homeowners Trust Us With Their Pavers
A beautiful paver finish starts long before the sealer goes on. Between Florida's intense sunshine, frequent summer storms, and year-round organic buildup, Taft driveways, patios, and pool decks can develop stubborn stains, deteriorating joint sand, and problems with older sealer. Applying a fresh coat without addressing those issues can leave behind cloudy patches, uneven finishes, or problems that become more noticeable after sealing.
That's why we take the time to understand what your pavers actually need. Before recommending a treatment, we consider the material, its condition, the existing sealer, and the state of the joints. Some surfaces need straightforward cleaning and joint-sand replenishment where applicable, while others require additional attention to staining, failing sealer, or more extensive restoration. We don't assume every driveway needs its old sealer stripped or all its joint sand replaced. We explain the options, recommend the appropriate approach, and make sure you understand what's included before we get started.
We treat every property with the same care and respect we'd give our own home. That means paying attention to the details, from the edges along your house and pool to the landscaping surrounding your pavers. We take pride in doing the preparation properly rather than rushing to apply a fresh coat of sealer. Our goal isn't simply to make your pavers look better on the day we finish. It's to help you protect your investment and feel confident that the work was done with care.
We're an owner-operated, Kissimmee-based company that regularly serves Taft, from the older homes off Landstreet Road to the Meadow Woods and Wyndham Lakes subdivisions. We're fully insured in Florida, with over 150 five-star Google reviews and a satisfaction guarantee. We also take and send before-and-after photos with every job, so you can see the work for yourself. Every property is different, but our commitment to careful preparation, honest recommendations, and quality workmanship stays the same.
What Makes Us Different:
- We identify the cause before treating it — White or cloudy patches can come from efflorescence or problems with old sealer. We evaluate the surface before deciding how to address them.
- We don't strip what doesn't need stripping — Existing sealer and joint sand are evaluated first. Extensive removal is performed only when necessary and included in your quote.
- We restore joints the right way — Sand-filled paver joints are replenished as part of our sanding-and-sealing service, while natural stone installations are treated according to their joint type and condition.
- We choose the right sealer for your surface — Concrete, brick, and travertine have different requirements. We consider the material, its condition, and compatibility with any existing coating.
- You choose the finish — We explain your matte and wet-look options, helping you choose an appearance that suits your property and the sealer appropriate for your surface.
Need the concrete cleaned but not sealed? See the full pressure and soft wash range on our exterior cleaning services. For pool decks specifically we also do pool deck cleaning and driveway & concrete cleaning, and you can see every city we cover on our service areas page.
Property Assessment & Firm Quote
In most cases, we can price your pavers remotely without scheduling an onsite estimate. We’ll pull the real measurements and ask about the paver type, the condition of the joint sand, and any efflorescence or staining, then provide a firm quote for cleaning, sand and sealer — usually within 1–3 business hours.
If we can’t accurately assess the property remotely, we’ll arrange an onsite visit. Once your quote is approved, your price won’t change unless the scope of work changes.
Pre-Treatment Application
Weeds and organic growth get a targeted pre-treatment so they lift in the wash instead of staining under the new sealer. Oil and rust staining is treated separately as a restoration add-on when it is identified and quoted ahead of the job. Old failing sealer is stripped, and efflorescence is neutralized before anything else.
Surface Cleaner Pressure Wash
A commercial rotary surface cleaner strips the pavers evenly — no zebra striping — and removes visible weeds and buildup from the joints. For travertine and natural stone, we use a surface-appropriate cleaning solution, allow sufficient dwell time to loosen organic buildup, and follow with a controlled low-pressure rinse. This approach helps remove buildup while protecting the integrity of the stone.
Edge Detailing & Rinse
Borders, steps, and the seams against the house and pool coping get extra attention where they need it, then the whole surface is rinsed clean and left to dry completely, because trapped moisture is a common cause of a hazy, milky seal.
Re-Sand the Joints
We restore the joints with fresh silica joint sand, sweeping it into every gap and packing it to depth. Full, stabilized joints help keep the pavers from shifting and make weeds and ant hills far harder to take hold.
Apply the Sealer & Cure
The step that changes everything. Once the surface is clean, re-sanded, and bone-dry, we apply your chosen finish — matte or wet-look — in even coats with a breathable sealer matched to your pavers. Cured, it helps preserve the color, reduce UV fading and stabilize the joint sand, and beads off water. We give you exact walk-on and drive-on times before we leave.
Every paver job we do is backed by a satisfaction guarantee. If something within the agreed scope was missed or isn't up to our standard, we'll come back and make it right.
Wet Look vs. Matte (Natural) Finish
Once your Taft pavers are cleaned and re-sanded, the finish is the final call to make. Both finishes are designed to protect the surface, so it really comes down to the look you want and your budget.
Matte (Natural) Finish
A natural, low-sheen finish that protects your pavers without making them look glossy. It gently deepens the color of concrete and stone while keeping a clean, understated look that fits an everyday Taft home.
- Natural, true-to-stone look with no glossy coating
- A gentle color lift with no glare
- A clean, classic finish that works on any home
- A simple, low-maintenance look
- Full sealing protection at a friendlier price
Wet Look (Glossy) Finish
A wet-look sealer deepens the natural color of your pavers and adds a smooth, glossy finish. It gives a faded, dust-worn driveway a richer, freshly restored appearance that makes the whole front of the house look newer.
- A deeper, more vibrant paver color
- A smooth wet sheen without the heavy gloss
- A fresh, like-new appearance
- Adds real curb appeal to driveways and walkways
- A finish that makes the whole property look cleaner and better kept
Both finishes are designed to protect the surface. Matte and wet-look sealers help repel water, oil, and spills, stabilize the joint sand, reduce weed and algae growth, and extend the life of your pavers. It really comes down to the look you want and your budget.
Pavers & Surfaces We Clean and Seal in Taft
Every common paver and stone surface across the area — matching the right pressure and the right sealer to each material.
Concrete Pavers
We clean and seal concrete pavers on the wide motor courts in Taft's newer subdivisions and on the lanais behind them. Any efflorescence that has surfaced is neutralized before we seal; after that, matte or wet-look, either finish takes well.
Travertine Pool Decks
Travertine is a soft, cool-underfoot natural stone, and we work on travertine pool decks in Meadow Woods and Wyndham Lakes. For travertine and natural stone, we use a surface-appropriate cleaning solution, allow sufficient dwell time to loosen organic buildup, and follow with a controlled low-pressure rinse. This approach helps remove buildup while protecting the integrity of the stone. Sealed with a penetrating sealer — never a glossy film.
Brick & Clay Pavers
Classic brick and clay, like the pavers we work on at the older homes off Landstreet Road. We thoroughly clean the pavers, prepare and re-sand the joints, and apply sealer once the surface is ready, to help hold the color and stabilize the joint sand. When a complete sand replacement is needed, we remove the existing joint sand before installing new material.
Paver Driveways
Heavy traffic and oil drips — and the wide builder-laid motor courts in the newer subdivisions, which aren't always sealed. Sealing helps keep stains out and the joint sand in place.
Community Pool Decks
Meadow Woods and Wyndham Lakes lanais, where HOA appearance standards apply. Sealing helps the deck resist UV fade and hold an even color.
Patios & Walkways
Where stains and weeds in the joints show most. Re-sanded and sealed, a patio holds up better against leaf tannins and grill grease, and full joints help keep the pavers from shifting underfoot.
Results That Speak For Themselves
What Taft Homeowners Say About Our Paver Work
"Outstanding service. We are blown away by the professionalism, level of service, attention to detail, and the price was affordable! We will absolutely hire again and let everyone know they have to go with AB Superior Wash paver cleaning — you won't regret it!"
"I had an amazing experience with this business from start to finish. The team was professional, responsive, and genuinely cared about delivering a great result. Everything was handled smoothly, and they went above and beyond to make sure I was satisfied."
"Professional, fast, and reliable. Worked with my budget and delivered excellent results. Great communication, attention to detail, and overall an awesome experience."
Areas We Seal Pavers In & Around Taft
Brick on the older lots, wide concrete motor courts in the newer subdivisions, travertine decks in Meadow Woods — different surfaces, each with its own cleaning and restoration needs. We tailor the process to the material, carefully prepare the surface, address joint sand where applicable, and apply an appropriate sealer.
32824
32824
32824
32824
32809
32809
32821
32824
Paver Sealing Taft FAQ
What homeowners and property managers ask us before we seal.
How much does paver sealing cost in Taft?
How long does paver sealer last in Taft's humidity?
Do you re-sand the joints before sealing my pavers?
Can you seal pavers in Meadow Woods or an HOA subdivision on a schedule?
Do the community HOA appearance rules affect how you seal pavers?
Why do my pavers have a chalky white haze?
Why Pavers Fade and Wash Out in Taft
Sealing is only the last of three stages, and it's only as good as the prep under it. First we clean the pavers at a pressure matched to the material and prepare the joints, clearing any efflorescence and weeds, and check the existing sealer, removing it only where it's failing or incompatible with the new coat. Oil or rust staining is a separately priced restoration add-on, identified and quoted before the job. Then, after the pavers have dried, we re-sand the joints. Only once the surface is clean, re-sanded, and fully dry do we seal. That order matters: seal over washed-out joints and the pavers stay loose; seal over a damp surface and you can lock a milky haze under a film that's hard to undo. Technical guidance from the Concrete Masonry & Hardscapes Association, the industry body that absorbed the old Interlocking Concrete Pavement Institute, says dirt, oil stains and efflorescence should be removed and the surface left dry before pavers are sealed.
Taft is hard on pavers in two specific ways. The sun and the year-round moisture fade unsealed color fast, so motor courts go gray and chalky long before their time. And our summer downpours flush sand out of open joints, which is why the pavers start to shift and the weeds and ant hills move in. The sealer helps hold the color. For the joints, we pack fresh silica to full depth instead of just topping them off, then lock it under the sealer, which helps keep the sand in place.
Where this really shows is the HOA-subdivision belt. The homes in Meadow Woods, Southchase and Wyndham Lakes are held to an appearance standard, so a faded, weedy motor court or a grimy travertine pool deck draws a board letter — and property managers want them kept consistent. Where builders laid paver drives on newer lots and never sealed them, the color fades and the joints empty out over time; sealing a fairly new surface is the best time to do it, before the stains set in. You choose the finish: a matte or natural look keeps the pavers understated, while a wet-look sealer deepens the color and adds shine. Concrete and brick can take either; for travertine and natural stone, we choose a sealer appropriate for the material, its condition and the finish you select. We walk you through the options before we open a bucket. How long the sealer takes to cure depends on the product and on our heat and humidity, so we'll give you the cure-time instructions for the specific sealer used on your project. When you're ready for the rest of the exterior, pair it with our pool deck cleaning and soft washing — or see the full Central Florida service area.
AB Superior Wash371 Bald Cypress Dr, Kissimmee, FL 34744
Phone: (407) 922-9857
Hours: Monday–Sunday, 7:30 AM – 8:00 PM
Written by Alejandro Garcia — Owner, AB Superior Wash · (407) 922-9857 · Open every day, 7:30 AM–8:00 PM
Last updated: November 2026
Ready For Sealed, Like-New Pavers?
Deep-cleaned, re-sanded, and sealed against the Florida sun — historic Taft to the Meadow Woods subdivisions.
