📞 Call for Free Quote — (407) 922-9857
Pool Deck CleaningSt. Cloud, FL
Algae and mildew turn a wet pool deck into a slip hazard right where your family walks barefoot. We clean durable concrete at higher pressure where that is appropriate and pavers at controlled pressure, minding the joints and joint sand — inside or outside the screen cage — leaving a bright, even, less slippery surface. Owner-operated out of Kissimmee, serving St. Cloud.
Why Clean Your Pool Deck
Lifts the Slick Algae
Wet algae is the reason a pool deck gets slick. Lifting it out of the surface is what leaves the deck less slippery underfoot.
Beats Shade and Humidity
Shade and moisture let algae take hold. We clean it down to a fresh, even surface.
Right Pressure per Surface
Rotary pressure suits durable concrete; pavers get controlled pressure with attention to the joints and joint sand; coatings get a cleaning solution, dwell time and a low-pressure rinse.
Bright, Even Finish
The deck dries to an even, light finish instead of the patchy grey-green it had before.
Get a Free Quote
Response within 1–3 business hours — no pressure, no obligation.
✓ No spam. We only use your info to reach you about your quote.
Why St. Cloud Families Trust Us With Their Pool Deck
A dirty pool deck is a slip hazard, not simply an eyesore. The black and green film that builds up on St. Cloud decks is algae, and algae holds water and turns slick the instant the deck gets wet. That's the exact spot where kids and adults walk barefoot, usually in a hurry, right at the edge of the water. Getting that growth out of the surface is the whole point, and it's why safety leads every pool deck job we do here.
Because water alone lifts only the surface film and leaves the growth in the pores, a water-only cleaning tends to green up again. We pre-treat first. A surface-appropriate cleaning solution goes across the whole slab and kills the algae, mold and mildew themselves, its strength and dwell time set by the material and how heavy the growth is, with extra attention on shaded, slow-drying areas. We clean only once that has worked, matching the method to the surface - treating the growth rather than rinsing it off is what makes the finish last.
Then there's the look. Once the algae is gone we go after the staining that makes a deck read as neglected — leaf tannins under the screen cage, rust from patio furniture, the chalky calcium that water pressure alone won't touch. A bright, even deck is the payoff, but a deck that is less slippery underfoot is the reason.
We're owner-operated out of Kissimmee, and we serve St. Cloud. We know what a pool deck deals with: shade and moisture, pollen, and sunscreen ground in around the waterline. The method is matched to what the surface can handle.
What Makes Us Different:
- Growth lifted out of the surface, leaving the deck less slippery when dry
- Method matched per surface — higher pressure where the concrete is durable enough, controlled on pavers with attention to the joints, treatment with dwell and a low-pressure rinse on coatings
- We clean the deck inside the screen cage and manage where runoff travels around the track and pool
- Rust, mineral and organic stains — some need additional spot treatment, depending on the surface and severity
- Before-and-after photos documented
Getting the enclosure cleaned too? See our pool cage cleaning in St. Cloud — we soft wash the screens and frame the same visit. Want the pavers protected afterward? We also handle paver sealing in St. Cloud, so one crew cleans, then comes back to seal. Prefer to see everything the hard-surface side covers? Start with our pressure washing in St. Cloud.
Have Pavers? Ask About Sanding & Sealing
Sealing is a separate service, not part of a standard pool deck cleaning. If you have a paver pool deck, we can come back once the surface is fully dry — typically the following day or as weather conditions allow — to re-sand the joints as needed and apply a professional paver sealer. That helps stabilize the joint sand, protect the surface, preserve its appearance depending on the sealer selected, and make future maintenance easier. One crew, from cleaning through sealing.
Every pool deck cleaning is backed by our 100% satisfaction guarantee. We’ll review the completed work with you, and if something we cleaned was missed or isn’t up to our standard, we’ll make it right.
Property Assessment & Firm Quote
In most cases, we can price your pool deck remotely without scheduling an onsite estimate. We’ll ask a few questions about the surface, size, condition, and areas you want cleaned, then provide a firm quote — usually within 1–3 business hours.
If we can’t accurately assess the property remotely, we’ll arrange an onsite visit. Once your quote is approved, your price won’t change unless the scope of work changes.
Choose Your Service Date
Choose a service date that works best for you. We’ll confirm your appointment in advance and send you a text when our crew is on the way.
Same-week appointments may be available depending on our schedule.
Property & Landscaping Protection
Before applying any cleaning solution, we thoroughly pre-wet nearby plants, shrubs, grass, and surrounding areas. Throughout the service, we continue rinsing and monitoring landscaping that may be exposed to overspray or runoff.
We can move a small amount of lightweight furniture when needed. If the deck has a large amount of furniture or heavy items, we can clean around them or add a small fee for furniture moving. Delicate items and surrounding surfaces are protected or avoided as needed.
Pre-Treatment Application
We apply a surface-appropriate cleaning solution across the pool deck to treat algae, mold, mildew, and other organic buildup — rather than relying on water pressure alone.
The strength of the treatment and dwell time are adjusted based on the surface material and its condition, with additional attention given to shaded and slower-drying areas where organic growth tends to be heavier.
This helps loosen the buildup before cleaning and helps the surface stay cleaner longer than a basic water-only cleaning.
Surface-Appropriate Cleaning
Every pool deck is cleaned according to the material — not with the same pressure across every surface.
On durable concrete, we can use a commercial rotary surface cleaner to produce an even, consistent finish. Pavers are cleaned using controlled pressure to minimize unnecessary disturbance of the joint sand.
For travertine, painted pool decks, coatings, or other more delicate surfaces, we rely more heavily on the proper cleaning solution, dwell time, and low-pressure rinsing instead of forcing high pressure onto the surface.
The goal is simple: use the cleaning method the surface actually calls for.
Edge Detailing & Final Rinse
Once the main surface has been cleaned, we detail the areas larger equipment can’t properly reach — including borders, coping, steps, corners, and edges around the pool and screen-track areas where applicable.
The entire deck is then thoroughly rinsed, along with surrounding areas and landscaping.
Post-Treatment for Longer-Lasting Results
When appropriate for the surface and its condition, we apply a final treatment to address remaining organic staining and help slow the return of algae and mildew.
This finishing step helps give the deck a cleaner, more even appearance and helps it stay cleaner longer between professional cleanings.
Pressure Washing vs. Soft Washing
The slab is hard surface, which is exactly what pressure is for. The surrounding surfaces, and the cage above them, are delicate. Here's how the two methods split the work on a St. Cloud pool area.
Pressure Washing
A commercial rotary surface cleaner at the right pressure covers the slab evenly and lifts ground-in algae and surface buildup.
- Broom-finish and smooth concrete decks
- Concrete and brick paver decks
- Pool deck coping, steps and walkways
What We Soft Wash Instead
The slab takes it. The materials around and above it do not. On these we switch to a low-pressure soft wash instead, which avoids the damage high pressure causes:
- The pool cage / screen enclosure — high pressure tears mesh out of the frame
- Kool Deck and other cool-deck coatings that strip under a wand
- Travertine and natural stone — treated, then rinsed at low pressure
- Screened lanai ceilings, roof edges and gutters above the deck
- Wood and vinyl fencing bordering the pool area
- House siding and stucco backing onto the deck
Pool Deck Surfaces We Clean in St. Cloud
The right method comes from the surface, not from a single pressure setting. Here is how each surface gets handled.
Broom-Finish & Smooth Concrete — High Pressure
Durable and forgiving. Higher pressure with a rotary surface cleaner gives an even result across the slab.
Concrete & Brick Pavers — Controlled Pressure
Cleaned at controlled pressure, with attention to the joints and joint sand. Can be re-sanded and sealed afterward.
Travertine — Treated, Then Low-Pressure Rinse
Travertine is treated rather than blasted: a cleaning solution, appropriate dwell time, then a controlled low-pressure rinse for the stone and its condition. High pressure etches natural stone.
Kool Deck / Cool-Deck Coatings — Low Pressure
Textured cool-deck coatings strip if you hit them too hard. They are treated with a cleaning solution, given dwell time, then rinsed at a controlled low pressure for the coating and its condition.
Stamped / Decorative Concrete — Low Pressure
Painted and coated decorative finishes get a cleaning solution, appropriate dwell time, then a controlled low-pressure rinse for the finish and its condition.
Screened Lanai Decks — Inside the Cage
Screened lanai decks and open pool areas are both covered. We work inside the cage, manage runoff at the track and clean to the frame.
Why Cleaning a Pool Deck Sooner Pays Off
Waiting isn't only about how the deck looks. On a St. Cloud pool deck it's both a safety risk and a staining problem — and both get worse the longer you wait.
A barefoot slip at the pool edge can mean a serious injury, and a wet algae film is what turns the surface slick.
Rust, calcium and deep algae work their way in rather than staying on top. Left alone, they set in. Some rust, mineral and organic stains may require additional spot treatment depending on the surface and severity.
Keeping a pool deck on a regular cleaning schedule means algae, mildew and surface staining are dealt with as part of routine maintenance.
Results That Speak For Themselves
What Homeowners Say About Our Pressure Washing
"I can't say enough about Alejandro's professionalism. He answered all my questions, and I had a lot of them. He scheduled the cleaning when it was convenient for me, showed up on time, and completed the driveway cleaning within a reasonable time. I highly recommend this company!"
"Excellent service! They knocked on my door offering a driveway cleaning. They showed me some of their work and I was very impressed, so decided to give them a chance. It turned out even better than I expected! Very professional and affordable pricing — I definitely recommend AB and will use them again."
"Outstanding service. We are blown away by the professionalism, level of service, attention to detail, and the price was affordable! We will absolutely hire again and let everyone know they have to go with AB Superior Wash paver cleaning — you won't regret it!"
Areas We Clean Pool Decks In & Around St. Cloud
Screened lanai decks and open pool surrounds, concrete, pavers and travertine alike — same surface-matched method, anywhere in the 34769–34773 range.
34769
34771
34772
34773
34771
34772
34771
34769 · 34771
Pool Deck Cleaning St. Cloud FAQ
What homeowners around St. Cloud ask us before we clean their deck.
How much does pool deck cleaning cost in St. Cloud?
Is my pool deck slippery because of algae, and will cleaning fix it?
Do you clean pool decks inside the screen enclosure?
Will pressure washing damage my pavers or travertine deck?
How often should I clean my pool deck in St. Cloud?
Do you also seal paver pool decks after cleaning?
Why Pool Decks Get Slick in St. Cloud
A dingy-looking deck is a reasonable thing to want fixed — but the more important reason to clean is underfoot. Shade and damp give algae and mildew what they need on a surface that rarely dries, and wet growth is slick where everyone is barefoot. Taking it out is what leaves the deck less slippery, so algae removal is the core of the work.
A deck that stays damp grows algae. On shaded areas it takes hold sooner. The fix is the same principle either way: get the growth out of the surface before it sets in.
Excessive or poorly matched pressure can damage sensitive surfaces. Durable broom-finish concrete can take a rotary surface cleaner at real pressure. Travertine, Kool Deck, other cool-deck coatings and stamped or painted concrete will etch, strip or blotch under that same wand, so we identify the material first and treat those with a cleaning solution, dwell time and a controlled low-pressure rinse. We also protect the deck's neighbors: the pool water, your landscaping, and the screen enclosure track. We manage and control runoff during cleaning to reduce migration toward pools, landscaping and nearby drainage areas. Some rust, mineral and organic stains may require additional spot treatment depending on the surface and severity, because pressure alone was never a stain remover.
We serve both ends of this town — the downtown grid and Hanover Lakes, Twin Lakes and Sunbridge. If you want the screen enclosure cleaned in the same visit, we soft wash it too; see our pool cage cleaning page, and for everything we cover beyond city limits, see our full Central Florida service area.
AB Superior Wash371 Bald Cypress Dr, Kissimmee, FL 34744
Phone: (407) 922-9857
Hours: Monday–Sunday, 7:30 AM – 8:00 PM
Written by Alejandro Garcia — Owner, AB Superior Wash · (407) 922-9857 · Open every day, 7:30 AM–8:00 PM
Last updated: July 2026
Ready For a Brighter Pool Deck?
Algae lifted, staining treated, and the deck bright underfoot, in the cage or out.
