📞 Call for Free Quote — (407) 922-9857
Pool Deck CleaningHunter's Creek, FL
On a shaded, screened lanai, algae and mildew turn a wet pool deck into a slip hazard right where bare feet land — and into a black film across the deck. We match the method to the material — pressure on concrete, controlled pressure on pavers with attention to the joints and joint sand, and on travertine or Kool Deck a cleaning solution left to dwell before a controlled low-pressure rinse — inside or outside the screen enclosure, leaving a bright, even, less slippery finish. Serving all of South Orange County's Hunter's Creek.
Why Clean Your Pool Deck in Hunter's Creek
Lifts the Slick Algae
On a shaded lanai the slickness is wet algae. Lifting it out of the surface leaves the deck less slippery.
Keeps Growth in Check
Pre-treating the algae and mildew, rather than rinsing the film off, is what makes the result last longer than a water-only wash.
Right Pressure per Surface
Concrete takes rotary pressure, pavers controlled pressure with attention to the joints, and travertine or Kool Deck a cleaning solution with dwell time and a controlled low-pressure rinse.
Bright, Even Finish
The lanai floor comes back an even tone instead of the mottled grey-green it had.
Get a Free Quote
Response within 1–3 business hours — no pressure, no obligation.
✓ No spam. We only use your info to reach you about your quote.
Why Hunter's Creek Homeowners Trust Us With Their Pool Deck
A dirty deck is a slip hazard first and an eyesore second. The black and green film that builds up on a shaded deck here is algae, and algae holds water and turns slick the instant the surface gets wet. Bare feet land there, usually moving quickly, right beside the water. A shaded deck stays damp longer, and growth takes hold there. Taking that growth out is the whole exercise, and it is why we lead with footing.
Water on its own lifts the surface film and leaves the growth in the pores, so a water-only cleaning greens up again. We pre-treat first: a surface-appropriate cleaning solution across the whole slab, killing the algae, mold and mildew themselves, with strength and dwell time set by the material and how heavy the growth is. Shaded, slow-drying areas get extra attention. Only once that has done its work do we clean, matching the method to the surface - treating the growth instead of rinsing it off is what makes the finish last.
Then there's the look. On a screened lanai that gets daily use, algae builds up in the corners. We serve Tanglewood, The Fairways and Deerfield. Once the algae is gone we go after the staining that reads as neglected: leaf tannins, rust from patio furniture, the chalky calcium that water pressure alone won't touch. A bright deck is what shows. A less slippery one is why it matters.
We're the local crew — owner-operated and serving Hunter's Creek and the surrounding South Orange County neighborhoods, not a franchise driving in blind. We know what a pool deck deals with: shade and moisture, pollen, and sunscreen ground in around the waterline. We set the method by what the material can take.
What Makes Us Different:
- Growth cleared from the surface, leaving a lanai deck less slippery underfoot
- Method per surface — higher pressure where the concrete can take it, controlled on pavers with attention to the joints, dwell-time treatment and a controlled low-pressure rinse on coatings
- Cleaning inside the screen enclosure, with runoff managed around the track and the pool
- Rust, mineral and organic stains — spot treatment may be needed as well, depending on the surface and severity
- Streaking and staining worked on according to the surface and severity — with before-and-after photos on request
Want the pavers protected afterward? We also handle paver sealing in Hunter's Creek, so one crew cleans, then comes back to seal. Prefer to see everything we clean around the home? Start with our full pressure washing in Hunter's Creek, or browse our soft washing services.
Have Pavers? Ask About Sanding & Sealing
Sealing is a separate service, not part of a standard pool deck cleaning. If you have a paver pool deck, we can come back once the surface is fully dry — typically the following day or as weather conditions allow — to re-sand the joints as needed and apply a professional paver sealer. That helps stabilize the joint sand, protect the surface, preserve its appearance depending on the sealer selected, and make future maintenance easier. One crew, from cleaning through sealing.
Every pool deck cleaning is backed by our 100% satisfaction guarantee. We’ll review the completed work with you, and if something we cleaned was missed or isn’t up to our standard, we’ll make it right.
Property Assessment & Firm Quote
In most cases, we can price your pool deck remotely without scheduling an onsite estimate. We’ll ask a few questions about the surface, size, condition, and areas you want cleaned, then provide a firm quote — usually within 1–3 business hours.
If we can’t accurately assess the property remotely, we’ll arrange an onsite visit. Once your quote is approved, your price won’t change unless the scope of work changes.
Choose Your Service Date
Choose a service date that works best for you. We’ll confirm your appointment in advance and send you a text when our crew is on the way.
Same-week appointments may be available depending on our schedule.
Property & Landscaping Protection
Before applying any cleaning solution, we thoroughly pre-wet nearby plants, shrubs, grass, and surrounding areas. Throughout the service, we continue rinsing and monitoring landscaping that may be exposed to overspray or runoff.
We can move a small amount of lightweight furniture when needed. If the deck has a large amount of furniture or heavy items, we can clean around them or add a small fee for furniture moving. Delicate items and surrounding surfaces are protected or avoided as needed.
Pre-Treatment Application
We apply a surface-appropriate cleaning solution across the pool deck to treat algae, mold, mildew, and other organic buildup — rather than relying on water pressure alone.
The strength of the treatment and dwell time are adjusted based on the surface material and its condition, with additional attention given to shaded and slower-drying areas where organic growth tends to be heavier.
This helps loosen the buildup before cleaning and helps the surface stay cleaner longer than a basic water-only cleaning.
Surface-Appropriate Cleaning
Every pool deck is cleaned according to the material — not with the same pressure across every surface.
On durable concrete, we can use a commercial rotary surface cleaner to produce an even, consistent finish. Pavers are cleaned using controlled pressure to minimize unnecessary disturbance of the joint sand.
For travertine, painted pool decks, coatings, or other more delicate surfaces, we rely more heavily on the proper cleaning solution, dwell time, and low-pressure rinsing instead of forcing high pressure onto the surface.
The goal is simple: use the cleaning method the surface actually calls for.
Edge Detailing & Final Rinse
Once the main surface has been cleaned, we detail the areas larger equipment can’t properly reach — including borders, coping, steps, corners, and edges around the pool and screen-track areas where applicable.
The entire deck is then thoroughly rinsed, along with surrounding areas and landscaping.
Post-Treatment for Longer-Lasting Results
When appropriate for the surface and its condition, we apply a final treatment to address remaining organic staining and help slow the return of algae and mildew.
This finishing step helps give the deck a cleaner, more even appearance and helps it stay cleaner longer between professional cleanings.
Pressure Washing vs. Soft Washing
The deck itself is hard surface, so pressure belongs on it. Everything around it, the enclosure above included, is delicate. Here's how the two methods split the work on a screened pool area here.
Pressure Washing
An industry-grade rotary surface cleaner matched to the surface lifts ground-in algae and surface buildup with even coverage.
- Broom-finish and smooth concrete decks
- Concrete and brick paver decks
- Pool deck coping, steps and walkways
What We Soft Wash Instead
Pressure is for the slab alone, not for what borders it. On these we switch to a low-pressure soft wash instead, which avoids the damage high pressure causes:
- The screen enclosure / pool cage — high pressure tears mesh out of the frame
- Kool Deck and other cool-deck coatings that strip under a wand
- Travertine and natural stone — treated, then rinsed at low pressure
- Screened lanai ceilings, roof edges and gutters above the deck
- Wood and vinyl fencing bordering the pool area
- House siding and stucco backing onto the deck
Pool Deck Surfaces We Clean in Hunter's Creek
A pool deck has no single correct pressure; what it is made of decides the method. Each surface below gets the method its material and condition call for.
Broom-Finish & Smooth Concrete — High Pressure
Durable and forgiving. An industry-grade rotary surface cleaner at higher pressure helps clean the slab evenly.
Concrete & Brick Pavers — Controlled Pressure
We keep the pressure controlled on pavers and work carefully around the joints and joint sand — re-sanding and sealing can follow.
Travertine — Treated, Then Low-Pressure Rinse
High pressure etches natural stone. Travertine is treated with a cleaning solution, allowed to dwell, and finished with a controlled low-pressure rinse appropriate to the stone and its condition.
Kool Deck / Cool-Deck Coatings — Low Pressure
Textured cool-deck coatings strip if hit too hard, so they get a cleaning solution, appropriate dwell time and a controlled low-pressure rinse for the coating and its condition.
Stamped / Decorative Concrete — Low Pressure
Painted and coated decorative finishes get a cleaning solution with dwell time and a controlled low-pressure rinse matched to the finish and its condition.
Screened Lanai Decks — Inside the Enclosure
Enclosed lanai decks and open pool areas are both in scope. We work in the enclosure, manage runoff around the track, and clean up to the frame.
What Happens When a Lanai Deck Is Left
Letting it go is about more than appearance. On a screened pool deck here it's a safety risk, a staining problem, and an appearance problem, and all three get worse the longer you wait.
The one spot around the home where a slick surface matters most is the pool edge, and a barefoot slip there can mean a serious injury.
A black-streaked deck or lanai reads as neglected from the first glance. Left alone, the staining sets in and gets harder to lift.
Rust, calcium and deep algae settle in rather than sitting on the surface. Left alone they set into the material. Some rust, mineral and organic stains may require additional spot treatment depending on the surface and severity.
Results That Speak For Themselves
What Hunter's Creek Homeowners Say About Our Pressure Washing
"Excellent service! They knocked on my door offering a driveway cleaning. They showed me some of their work and I was very impressed, so decided to give them a chance. It turned out even better than I expected! Very professional and affordable pricing — I definitely recommend AB and will use them again."
"Very professional and reasonably priced! Will definitely recommend!"
"Exceptional Work! These guys are really professionals — love the service."
Villages We Clean Pool Decks Across Hunter's Creek
Tanglewood, The Fairways, Deerfield and the surrounding villages — same surface-matched method, from the 32837 core out to the Meadow Woods and Falcon Trace lines.
32837
32837
32837
32837
32837
32837
32837
32837
Pool Deck Cleaning Hunter's Creek FAQ
What homeowners around Hunter's Creek ask us before we clean their deck.
How much does pool deck cleaning cost in Hunter's Creek?
Will a clean pool deck improve how the property looks?
Is my pool deck slippery because of algae, and will cleaning fix it?
Will pressure washing damage my pavers or travertine deck?
How often should I clean a pool deck in Hunter's Creek?
Do you also seal paver pool decks after cleaning?
Why Pool Decks Get Slick in Hunter's Creek
Appearance is one reason to clean a lanai deck. Footing is the better one. A lanai deck sits in shade, holds damp, and gives algae and mildew what they need; wet growth is slick, and this is the one surface everyone crosses barefoot. Clearing it is what leaves the deck less slippery, so algae removal is the center of the job, not an afterthought.
We clean pool decks throughout Hunter's Creek. A slick, black-streaked deck isn't just a safety issue here — it also makes the whole pool area look neglected. We serve Tanglewood, The Fairways and Deerfield. It helps to stay ahead of it: shade and humidity keep a lanai deck damp, and oak tannins stain the surface.
Excessive or poorly matched pressure can damage sensitive surfaces. Durable broom-finish concrete can take a rotary surface cleaner at real pressure. Under that same wand, travertine, Kool Deck, other cool-deck coatings and stamped or painted concrete will etch, strip or blotch, so we identify the material first and treat it with a cleaning solution, dwell time and a controlled low-pressure rinse. We also protect the deck's neighbors: the pool water, your landscaping, and the screen enclosure track. We manage and control runoff during cleaning to reduce migration toward pools, landscaping and nearby drainage areas. Some rust, mineral and organic stains may require additional spot treatment depending on the surface and severity, because pressure alone was never a stain remover.
We clean pool decks across Hunter's Creek and the neighboring South Orange County communities — Meadow Woods, Southchase, Williamsburg and Falcon Trace — as well. If you want the pavers sealed once the deck is clean and dry, we handle that too; see our paver sealing page, and for everything we cover across the region, see our full Central Florida service area.
AB Superior Wash371 Bald Cypress Dr, Kissimmee, FL 34744
Phone: (407) 922-9857
Hours: Monday–Sunday, 7:30 AM – 8:00 PM
Written by Alejandro Garcia — Owner, AB Superior Wash · (407) 922-9857 · Open every day, 7:30 AM–8:00 PM
Last updated: July 2026
Ready to Clear the Lanai Deck?
Slippery algae lifted, staining treated, the deck bright underfoot — concrete, pavers, travertine or Kool Deck, inside the enclosure or out. Bright, even, and no longer the deck that looks neglected.
